CH-2537TXWPUD

型錄下載 > 請按我

產品介紹

This wallplate transmitter is a dual HDMI and VGA switch with audio embedding and HDBaseT output. The wall plate is designed for use with US two-gang sized enclosures. This Transmitter can send high definition uncompressed audio/video along with Ethernet over a single cable up to a distance of 100 meters at 1080p@60Hz. The HDMI inputs support resolutions up to 4K@60Hz (4:4:4, 8-bit) and the VGA input supports resolutions up to WUXGA (RB). With the use of the 3.5mm audio input, stereo audio may be embedded with VGA or DVI sources as well. Despite HDBaseT’s 10.2Gbps bandwidth limitation, high bandwidth 4K UHD HDMI video sources, up to and including 4K@60Hz (4:4:4, 8-bit), can be supported and will be converted to 4:2:0, 8-bit color when necessary.

A multi-function button on the face of the unit provides access to an information OSD as well as allowing manual input selection. Automatic input detection between the HDMI and VGA inputs with hot plug detection is also supported, enabling hands-free operation. Additionally, this Transmitter (PD) may be powered locally or via 48V PoH from a compatible HDBaseT Receiver (PSE), which allows for greater flexibility in installations. The unit can be controlled via the front panel button with OSD, WebGUI, Telnet, and RS-232 (w/ compatible Receiver only) making it exceptionally versatile.

產品特色

• HDMI 2.0 and DVI 1.0 compatible.

• HDCP 2.2 and HDCP 1.x compliant.

• 2 HDMI inputs.

• 1 VGA input with 3.5mm mini-jack audio input.

• Wall plate is designed for US two-gang sized enclosures.

• Supports HDMI input resolutions up to 4K@60Hz (4:4:4, 8-bit)

• Supports VGA input resolutions up to WUXGA (RB)

• Analog stereo audio may be embedded with VGA or DVI sources.

• HDBaseT output resolutions up to 4K@60Hz (4:2:0, 8-bit) with automatic color space conversion of ・4K@50/60Hz (4:4:4, 8-bit) sources.

• Simultaneous transmission of uncompressed video, audio and data over a single 100m/328ft Cat.5e/6/7 cable at 1080p60 and 70m/230ft at 4K.

• User activated signal information OSD.

• Unit may be powered locally or via 48V PoH (PD) from a compatible HDBaseT Receiver (PSE)

• Supports manual input selection or automatic input selection with hot plug detection.

• Front panel LEDs indicate HDCP mode, input source, and power.

• Controllable via a multi-function front panel button with OSD, WebGUI, Telnet, and RS-232 (w/ compatible Receiver only)

• USB port supports firmware update and charging of 5V/1A devices.

產品規格

安裝示意圖

包裝內容

• 1×3 by 1 HDMI/VGA to HDBaseT Switcher (US 2-Gang)

• 1×Operation Manual