CH-2603RX

4K UHD+ HDMI/HDBaseT To Dual HDMI Matrixing Receiver (PSE) With USB/KVM Extension

產品型號 : CH-2603RX

產品規格 : 4K UHD+ HDMI/HDBaseT To Dual HDMI Matrixing Receiver (PSE) With USB/KVM Extension

型錄下載 > 請按我

產品介紹

This HDBaseT 2.0 receiver is designed for use in environments needing a wide range of flexibility when it comes to inputs, outputs, and control. With a 2 by 2 matrix arrangement of HDBaseT & HDMI inputs and dual HDMI outputs this Receiver can handle a variety of source routing scenarios. The HDMI input and outputs support resolutions up to a maximum of 4K@60Hz (4:4:4, 8-bit) while the HDBaseT input supports resolutions up to a maximum of 4K@60Hz (YUV 4:2:0, 8-bit). A balanced analog stereo audio breakout is also provided (LPCM 2.0 sources only) allowing for professional local powered speakers to be easily added to the system. The HDBaseT input not only supports video and audio but also bidirectional Ethernet, RS-232, USB, and IR.

When paired with this unit’s standard Transmitter,up to 3 switchable USB 2.0 host (Type-B) connections are available(2 on the Transmitter, 1 on the Receiver)which connect to up to 6 USB 2.0 (Type-A) device ports (3 on the Transmitter, 3 on the Receiver) for a multi-source, bidirectional, and highly flexible KVM configuration (Note: Only 1 USB host may be active at a time).

This Receiver (PSE) can provide 48V PoH (Power over HDBaseT) power to the connected HDBaseT Transmitter (PD) (compatible Transmitters only), allowing for greater flexibility within different installation scenarios. This unit is controllable via front-panel controls, WebGUI, Telnet, and RS-232.

產品規格

HDMI with 18Gbps (600MHz), 3D & 4K video support; HDBaseT 2.0 compatible.
HDCP 1.x & 2.2 compliant.
Selectable HDMI and HDBaseT inputs.
HDMI input supports resolutions up to 4K@60Hz (4:4:4, 8-bit)
HDBaseT input supports resolutions up to 4K@60Hz (YUV 4:2:0, 8-bit)
HDMI output supports resolutions up to 4K@60Hz (4:4:4, 8-bit)
2×2 matrix switching (both HDMI outputs are independent)
Supported HDBaseT features: HD video and audio, 100BaseT Ethernet, 48V PoH, and control (bidirectional IR/RS-232/USB pass-through)
Supports pass-through of LPCM 2.0/5.1/7.1, Bitstream & HD Bitstream audio formats.
Balanced analog stereo audio breakout.
Flexible USB host selection using front panel buttons.
Multiple USB hosts may be connected at once (up to 3 total, between the Tx and a compatible Rx unit) with a single selected host active at a time.
Supports 48V PoH from Receiver (PSE) to Transmitter (PD) (compatible Transmitters only)
Controllable via front panel buttons, WebGUI, Telnet, and RS-232.